Support

Support home  |  Obtaining support  |  Licence key queries  |  Local distributors  |  Training  |  Consultancy  |  User group  |  User area  |  Distributor area

LUSAS Training Courses

Last updated : 09 March 2010

LUSAS software training is provided through:

See also 


Scheduled LUSAS Training Courses for 2010

Dates Course Name Location Duration Course cost

January 2010 No courses scheduled

February 2010
2-4 LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 850 (£GBP)
22-24*  LUSAS for Structural and Bridge Applications (USA) *** Course Full *** Phoenix, USA 3 days 1750 ($US)
* Dates revised from those previously published to now precede the 2010 Concrete Bridge Conference in Phoenix

March 2010

1-2 LUSAS Dynamic Analysis

Kingston upon Thames, UK

2 days 600 (£GBP)
3-5 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 850 (£GBP)
17-18 LUSAS for Structural and Bridge Applications Helsinki, Finland 2 days 700 Euro
23-25 LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 850 (£GBP)

April 2010  
21-23 LUSAS for Structural and Bridge Applications (USA) Chicago, USA 3 days 1750 ($US)

May 2010
11-13 LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 850 (£GBP)
19-20 LUSAS for Structural and Bridge Applications (UK) Dublin, Republic of Ireland 2 days 700 (Euro)

June 2010
14-15

LUSAS Dynamic Analysis 

Kingston upon Thames, UK

2 days 600 (£GBP)
16-18 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 850 (£GBP)

July 2010
14-16  LUSAS for Structural and Bridge Applications (USA) Philadelphia, USA 3 days 1750 ($US)

The following courses are scheduled but are not yet available for booking.
August 2010
10-12  LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 850 (£GBP)

September 2010
13-14 LUSAS Dynamic Analysis

Kingston upon Thames, UK

2 days 600 (£GBP)
15-17 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 850 (£GBP)

November 2010
9-11  LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 850 (£GBP)

December 2010
6-7 LUSAS Dynamic Analysis

Kingston upon Thames, UK

2 days 600 (£GBP)
8-10 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 850 (£GBP)

Back to top

General notes relating to LUSAS Training Courses

  • LUSAS scheduled training courses get you up-to-speed quickly and ensure that you have sufficient knowledge of the relevant facilities in LUSAS to tackle the types of analysis that you want to do.
  • ‘Introduction to LUSAS’ training courses cater for all engineering disciplines. Course content and hands-on examples will be tailored according to those on the course.
  • Delegates for the ‘LUSAS Nonlinear’ and ‘LUSAS Dynamics’ training courses should ensure that they are familiar with linear static structural analysis using LUSAS prior to attending one of these courses. Prior attendance at an Introduction to LUSAS course (or equivalent) is recommended.
  • Places for all courses are limited and cannot be reserved without completing and submitting a booking form.

Locations / venues:

  • Training courses held in Kingston upon Thames, Surrey, UK, will be at, or close to, the LUSAS head office.
  • Training courses held in the cities listed will be at venues to be advised prior to the start of the course.
  • For all courses joining instructions containing details and, where possible, maps of the event location are sent to all delegates prior to the commencement of a course.

Course Costs:

  • Course costs are quoted in local currencies and are exclusive of any local goverment taxes (if applicable)
  • Costs include full course documentation, individual computer hardware (unless noted on the individual course description page), lunch and refreshments.
  • LUSAS training credits may be substituted for payment.

Discounts available:

  • Up to 50% discount is available to full-time academics on scheduled training courses subject to availability.

Accommodation and Directions:

  • For courses running in Kingston upon Thames, UK, a list of local hotels is available on request. We can advise on establishments sited near where training course is taking place, or those more suitable for your budget. Alternatively click here for a general list of hotels and guest houses in Kingston upon Thames and surrounding areas. See this location map or download a map with directions to our UK head office. (PDF 300K)

On-site / Customised Training Courses

LUSAS on-site and customised training courses are also available. They can be tailor-made to your requirements and take place at your office or any location you specify. Depending upon numbers attending they can provide a more cost-effective way of training a large number of staff without incurring staff travel and accommodation costs. 

  • For details of on-site / customised training courses and costs please contact your local distributor or your account manager.

Other training courses

Examples of other UK based training courses that can be run according to demand include:

Month and Date(s) Course Name Location Duration Course cost

On request LUSAS for Structural and Bridge Applications (Intermediate)

To be advised

2 days TBA (£GBP)
On request LUSAS for Structural and Bridge Applications (Advanced)

To be advised

2 days TBA (£GBP)
On request Composites Analysis

To be advised

1 day TBA (£GBP)
On request Thermal Analysis To be advised 1 day TBA (£GBP)
On request LUSAS Customisation and Integration course To be advised 1 day TBA (£GBP)
  • For details of LUSAS training courses that may be offered in other countries please contact your local distributor.

Back to Top

Any modelling and analysis capabilities described on this page are dependent upon the LUSAS software product and version in use.

home | software | options | case studies | support | consultancy | academics | news | contact us | jobs | search


LUSAS is a trademark and trading name of Finite Element Analysis Ltd.
Copyright © 1982-2010 Last modified: March 09, 2010.