User Area
> Advice
LUSAS Solver start-up file
Various system variables can be set for LUSAS
Solver, for a particular model via the Modeller user
interface:
File > Model Properties
> Solver System Variables tab
Some system variables can be
changed globally for LUSAS Solver via the LUSAS Configuration
Utility and these will be stored in the Solver start-up file.
It should not normally be necessary for a user to change settings
directly in the Solver start-up file, and it is therefore
recommended that it is not manually edited unless you are advised
to do so by LUSAS Support for a particular reason. If you
require further assistance with changing Solver system variables,
then please contact
support for assistance.
Notes
The start-up file for LUSAS
Solver (lusas.str) and the start-up file for LUSAS Modeller
(lusasm.str) are located in C:\LUSAS15x\Programs\Config.
|
