Engineering analysis and design software
Any structure. One solution.


Support home  |  Obtaining support  |  Licence key queries  |  Distributors / resellers  |  Videos  |  Training  |  Testimonials  |  Consultancy  |  User area  |  Distributor area

LUSAS Training Courses

Last updated : 08 August 2017

LUSAS software training is provided through:

See also General notes relating to LUSAS Training Courses

Scheduled LUSAS Training Courses 2017

Online booking

Dates Course Name Location Duration Course cost

August 2017 No courses scheduled
September 2017
6-8 LUSAS for Structural and Bridge Applications (North America) New York, NY, USA 3 days 1750 ($USD)

LUSAS Dynamic Analysis

Kingston upon Thames, UK

2 days

350 (GBP) - Previously 700
13-15 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 475 (GBP) - Previously 950
October 2017
24-26 LUSAS for Structural and Bridge Applications (UK) Kingston upon Thames, UK 3 days 475 (GBP) - Previously 950
November 2017
14-16 LUSAS for Structural and Bridge Applications (North America) Dallas, TX, USA 3 days 1750 ($USD)
December 2017

LUSAS Dynamic Analysis

Kingston upon Thames, UK

2 days

350 (GBP) - Previously 700
6-8 LUSAS Nonlinear Analysis Kingston upon Thames, UK 3 days 475 (GBP) - Previously 950

Some delegate feedback from recent LUSAS training courses:

  • This class was excellent and one of the best training courses that I have taken." (Tim E.)

  • Very good demonstrations/teachers with a good variety of hands on examples. (Douglas R.)

  • "The instructor was phenomenal! Engaged, energetic, helpful and friendly! Could not have asked for a better one." (Joe K.)

General notes relating to LUSAS Training Courses

  • LUSAS scheduled training courses get you up-to-speed quickly and ensure that you have sufficient knowledge of the relevant facilities in LUSAS to tackle the types of analysis that you want to do.

  • LUSAS Nonlinear and LUSAS Dynamics training courses cater for all engineering disciplines. Delegates should ensure that they are familiar with linear static structural analysis using LUSAS prior to attending one of these courses.

  • Places for all courses are limited and cannot be reserved without completing and submitting a booking form.

  • CPD or PDH: LUSAS training courses may be considered for contributing to a recognised Continuing Professional Development or Professional Development Hours scheme. Delegates should check their individual scheme requirements.

Locations / venues / directions

  • Training courses held in Kingston upon Thames, Surrey, UK, will be at, or close to, the LUSAS head office. See this location map or download a map with directions to our UK head office.

  • Training courses held in the cities listed will be at venues to be advised prior to the start of the course.

  • For all courses joining instructions containing details and, where possible, maps of the event location are sent to all delegates prior to the commencement of a course.

Course Costs:

  • Course costs are quoted in local currencies and are exclusive of any local goverment taxes (if applicable)

  • Costs include full course documentation, individual computer hardware (unless noted on the individual course description page), lunch and refreshments.

  • LUSAS training credits may be substituted for payment.

Discounts available:

  • Discounts on scheduled training course costs may be available for full-time academics subject to availability. Please contact LUSAS for details.


  • For training courses running in Kingston upon Thames, UK, see this list of local guest houses and hotels. We may be able to advise further on particular establishments on the list, or on those more suitable for your budget.


  • Cancellations following a booking to attend a training course that are received in writing 14 days prior to a training course taking place will be fully refunded. We regret that no refund can be given for cancellations after this time. However, if you are unable to attend, you may send a substitute delegate from within your organisation and should ideally notify us in advance of the course, giving the persons name. LUSAS reserves the right to reject bookings, and to cancel or re-schedule courses at any time. 

On-site / Customised Training Courses

LUSAS on-site and customised training courses are also available. They can be tailor-made to your requirements and take place at your office or any location you specify. Depending upon numbers attending they can provide a more cost-effective way of training a large number of staff without incurring staff travel and accommodation costs that would otherwise be incurred if sending those staff to attend a scheduled training course.

  • For details of on-site / customised training courses and costs please contact your local distributor or your account manager. Once booked, terms and conditions regarding cancellation (different from scheduled training course cancellation) will apply in accordance with LUSAS company policy, or any quotation given.

  • For details of LUSAS training courses that may be offered in other countries please contact your local distributor.

LUSAS is a trademark and trading name of Finite Element Analysis Ltd. 
Copyright 1982 - 2017 LUSAS. Last modified: August 08, 2017. Privacy policy

Any modelling and analysis capabilities described on this page are dependent upon the LUSAS software product and version in use.